Maintenance and care
Brush reset
If something becomes lodged in the foot and the rotating brush shuts off, turn the vacuum off and unplug from the outlet. Remove the obstruction. The brush will automatically reset when the cleaner is plugged in and turned back on.
Brush maintenance
The rotating brush should be checked regularly for accumulating debris that might reduce the cleaning performance of your vacuum.
1.Unplug vacuum from electrical outlet.
2.Recline the handle and turn your vacuum over so the bottom side is up.
3.Carefully cut away any visible hair, fibers or debris from the brush roll.
Do not attempt to disassemble the vacuum foot or to remove the brush roll. If you feel it needs to be checked or replaced, call BISSELL Consumer Services or visit the website to locate an authorized service center.
Belt maintenance
The brush belt is designed to last the useful life of the vacuum when used according to all instructions in the user guide under normal household conditions. If you feel that it needs to be checked or replaced, call BISSELL Consumer Services or visit the website to locate an authorized service center. Do not attempt to disassemble the vacuum foot to change the belt.
CAUTION:
To reduce the risk of injury from moving parts, turn off the vacuum cleaner and disconnect power plug from electrical outlet.
3
146 w w w . b i s s e l l . c o m
