Canon FDW75C12N Installing Quick Release Brackets, Attach camera using these 3 holes, JVC VN-C30U

INSTALLING QUICK RELEASE BRACKETS

JVC VN-C30U

2539 Mounting Plate:

Attach camera using these (3) holes

½"

2"

1.Remove the mounting plate from the camera and place it onto the quick release bracket using the (3) metric 3M Phillips head screws provided with the kit. Then place the mounting plate back onto the JVC VN-C30U.

2.In the packet, there will be a number of 2 inch and

½inch spacers. Take four of the ½ inch spacers and screw them onto the spacers that are on the base bracket (to make a 2½ inch spacer). Place two 8/32 X s Philips head screws on the two and a half inch spacer in the dome. Be sure to place the screws so they line up with the two open screw slots on the quick release bracket. Place the JVC VN-C30U pan/tilt and quick release bracket in the housing, sliding the two open screw slots over the screws in the housing. Slide the bracket forward, and then tighten the captive screw on the bracket.

- 14 -