Canon FDP75C12N, FDW75C12N Installing Quick Release Brackets, Attach camera using these 4 holes

INSTALLING QUICK RELEASE BRACKETS

ELMO PTC-201

Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding.

2539 Mounting Plate:

Attach camera using these (4) holes

½"

2"

1.Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided with the kit.

2.The Elmo PTC-201 camera requires 2½" of spacing for optimal position within the housing. Use (4) 2" spacer(s) plus (4) ½" spacer(s) provided in the (2) hardware packets.

3.Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

4.Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener.

- 11 -