INSTALLING QUICK RELEASE BRACKETS
PIXORD 261 / 262
2630 Mounting Plate:
Attach camera using these (3) holes
½"
1.Install the camera to the 2630 mounting plate using the (3) 8 x 32 x .5 flat head screws, nuts and washers provided.
2.The PIXORD 261/262 cameras require ½“ of spacing to properly position the camera within the housing. Use
(4) ½” spacers provided in the hardware packets.
3.Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.
4.Slide the mounting plate with camera into position on top of spacers. Secure 3 screws and captive fastener.
- 16 -