FDW75C12N, FDP75C12N
IP Ready Network Housing
IP Ready Network Housing with 12Vdc input, wall mount or pendant mounting, heater & blowers, ready for standard IP PTZ cameras.
ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):
!Power 12Vdc, Class 2 Only
Total Power: 21 watts Housing only
Accessories (Heater/Blower): 21 watts
Heater: 20 watts
Blower: 1 watt
NOTE: This unit is designed for operation in an upright position. Installing the housing upside down may cause damage to the internal equipment, and will void the warranty.
ASSEMBLING THE UNIT:
Remove content from all boxes. Contents should include:
Main Housing Assembly
Either with wall mount or pendant bracket
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
Be sure the bracket is properly and securely mounted
!to a supporting structure capable of rigidly holding the weight of the entire unit.
CARE AND CLEANING OF DOMES:
All FDW75 and FDP75 units include an optically clear polycarbonate dome. The dome is an optical device and should be handled with extreme care. Leave protective film on dome until product is fully assembled and installed. Even though the dome is virtually unbreakable, it can be easily scratched.
Clean only with a clean cotton cloth and warm water.
DO NOT use a strong solvent or cleanser!
Dome Assembly - Clear or Tinted
Do not remove the protective film until the product is assembled and installed.
3 Packet Assemblies
- -