HP 7000 dl Router manual Show ip protocols, #show ip protocols

SROS Command Line Interface Reference Guide Enable Mode Command Set

show ip protocols

Use the show ip protocols command to display IP routing protocol parameters and statistics.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show ip protocols command:

>enable

#show ip protocols

Sending updates every 30 seconds, next due in 8 seconds

Invalid after 180 seconds, hold down time is 120 seconds

Redistributing: rip

Default version control: send version 2, receive version 2

Interface	Send Ver. Rec Ver.
eth 0/1	2	2
ppp 1	2	2

Routing for networks: 1.1.1.0/24

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 163