HP 7000 dl Router manual Debug pppoe client, Enable #debug pppoe client

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug pppoe client

Use the debug pppoe client command to activate debug messages associated with point-to-point protocol over Ethernet (PPPoE) operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Mode

Functional Notes

The debug ip rip command activates debug messages to provide information on Routing Information Protocol (RIP) activity in the Secure Router OS. RIP allows hosts and routers on a network to exchange information about routes.

Usage Examples

The following example activates debug messages associated with PPPoE activity:

>enable

#debug pppoe client

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 92