HP 7000 dl Router manual Debug ip igmp group-address, #debug ip igmp

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip igmp <group-address>

Use the debug ip igmp command to enable debug messages for IGMP transactions (including helper activity).

Syntax Description

<group-address>Optional. IP address of a multicast group.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example enables IGMP debug messages for the specified multicast group:

>enable

#debug ip igmp 224.1.1.1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 82