HP 7000 dl Router manual Clock set time day month year, Enable #clock set 034200 22 Au

SROS Command Line Interface Reference Guide Enable Mode Command Set

clock set <time> <day> <month> <year>

Use the clock set command to configure the system software clock. For the command to be valid, all fields must be entered. See the Usage Example below for an example.

Syntax Description

<time>	Sets the time of the system software clock in the format HH:MM:SS
	(hours:minutes:seconds).
<day>	Sets the current day of the month (valid range: 1 to 31).
<month>	Sets the current month (valid range: January to December). You need only enter
	enough characters to make the entry unique. This entry is not case-sensitive.
<year>	Sets the current year (valid range: 2000 to 2100).

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example sets the system software clock for 3:42 pm, August 22 2004:

>enable

#clock set 03:42:00 22 Au 2004

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 50