HP 7000 dl Router manual Adsl Interface Config Command SET, Adsl Interface Config Command Set

SROS Command Line Interface Reference Guide ADSL Interface Config Command Set

ADSL INTERFACE CONFIG COMMAND SET

To activate the ADSL Interface Configuration , enter the interface adsl command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#interface adsl 0/1

Router(config-adsl 0/1)#

The following commands are common to multiple command sets and are covered in a centralized section of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 923

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924 description on page 927

do on page 928 exit on page 930

ping <address> on page 931 show running-configon page 933

shutdown on page 935

All other commands for this command set are described in this section in alphabetical order.

retrain on page 702

snr-margin [showtime monitor training monitor] <margin> on page 703 training-mode [G.DMT G.LITE Multi-Mode T1.413] on page 704

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 701