HP 7000 dl Router manual Spanning-tree max-age seconds, Config#spanning-tree max-age

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree max-age <seconds>

Use the spanning-treemax-agecommand to specify the interval (in seconds) the spanning-tree will wait to receive Bridge Protocol Data Units (BPDUs) from the root bridge before assuming the network has changed (thus re-evaluating the spanning-tree topology). Use the no form of this command to return to the default interval.

Syntax Description

<seconds>	Wait interval (in seconds) between received BPDUs (from the root bridge).
	Range: 6 to 40.

Default Values

<seconds> 20 seconds

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example configures a max-age interval of 45 seconds:

(config)#spanning-tree max-age 45

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 350