HP 7000 dl Router manual Ip ospf authentication message-digest null

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

ip ospf authentication [message-digest null]

Use the ip ospf authentication command to authenticate an interface that is performing OSPF authentication.

Syntax Description

message-digest	Optional. Select message-digest authentication type.
null	Optional. Select for no authentication to be used.

Default Values

By default, this is set to null (meaning no authentication is used).

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	Frame Relay sub-interfaces (fr 1.20), and loopback interfaces

Usage Examples

The following example specifies that no authentication will be used on the PPP interface:

(config-ppp 1)#ip ospf authentication null

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 756