HP 7000 dl Router manual Ip route-cache, Config#interface loopback 1 config-loop 1#ip route-cache

SROS Command Line Interface Reference Guide Loopback Interface Configuration Command Set

ip route-cache

Use the ip route-cachecommand to enable fast-cache switching on the interface. Use the no form of this command to disable fast-cache switching and return to process switching mode.

Note	Using Network Address Translation (NAT) or the Secure Router OS firewall capabilities on
	an interface requires process switching mode (using the no ip route-cachecommand).

Syntax Description

No subcommands.

Default Values

By default, fast-cache switching is enabled on all Ethernet and virtual Frame Relay sub-interfaces. IP route-cache is enabled for all virtual PPP interfaces.

Command Modes

(config-interface)#	Interface Configuration Mode required
	Valid interfaces include: Ethernet (eth 0/1), virtual Frame Relay sub-interfaces
	(fr 1.16), virtual PPP interfaces (ppp 1), and loopback interfaces.

Functional Notes

Fast switching allows an IP interface to provide optimum performance when processing IP traffic.

Usage Examples

The following example enables fast switching on the loopback interface:

(config)#interface loopback 1 (config-loop 1)#ip route-cache

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 871