HP 7000 dl Router 511, Show qrss, Config#interface e1 1/2 config-e11/2#test-pattern ones

SROS Command Line Interface Reference Guide G.703 Interface Configuration Command set

test-pattern [511 l clear l insert l ones qrss l show 511 l show qrss l zeros]

Use the test-patterncommand to activate the built-in pattern generator and begin sending the specified test pattern. This pattern generation can be used to verify a data path when used in conjunction with an active loopback. Use the no form of this command to cease pattern generation.

Syntax Description

511	511-bit repeating pattern of ones and zeros.
clear	Clears the test pattern error count on the G.703 interface.
insert	Inserts an error into the generated test pattern being transmitted on the G.703
	interface. The injected error result is displayed using the show 511 command.
ones	Generates continous ones.
qrss	Inserts a quasi-random signal source test pattern.
show 511	Displays the injected error result.
show qrss	Displays the injected QRSS result.
zeros	Generates continous zeros.

Default Values

No defaults necessary for this command.

Command Modes

(config-e1 1/1)#	T1, DSX-1, E1, or G.703 Interface Configuration Mode required.
(config-e1 1/2)#

Usage Examples

The following example activates the pattern generator for a stream of continuous ones:

(config)#interface e1 1/2 (config-e11/2)#test-pattern ones

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 550