HP 7000 dl Router manual Debug spanning-tree bpdu receive transmit all, Receive, Transmit, All

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug spanning-tree bpdu [receive transmit all]

Use the debug spanning-tree bpdu command to display BPDU (bridge protocol data unit) debug messages. When enabled, a debug message is displayed for each BPDU packet that is transmitted or received by the unit.

Syntax Description

receive	Displays debug messages for BPDU packets received by the unit.
transmit	Displays debug messages for BPDU packets transmitted by the unit.
all	Displays debug messages for BPDU packets that are transmitted and received by
	the unit.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example displays debug messages for BPDU packets that are transmitted and received by the unit:

>enable

#debug spanning-tree bpdu all

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 96