HP 7000 dl Router manual Loopback remote

SROS Command Line Interface Reference Guide E1 Interface Configuration Command Set

loopback remote v54

The loopback remote v54 command transmits an E1 remote loopback to the far end. Use the no form of this command to disable this feature.

Syntax Description

No subcommands.

Default Values

No default value is necessary for this command.

Command Modes

(config-e1 1/1)# E1 interface configuration mode.

Functional Notes

This command causes a V.54 inband loop code to be sent in the payload towards the far end.

Usage Examples

The following example sends a V.54 inband loop code to the far end:

(config)#interface e1 1/1 (config-e1 1/1)#loopback remote v54

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 536