SROS Command Line Interface Reference Guide

Global Configuration Mode Command Set

 

 

spanning-tree mode [rstp stp]

Use the spanning-tree mode command to choose a spanning-tree mode of operation.

Syntax Description

rstp

Enables rapid spanning-tree protocol.

stp

Enables spanning-tree protocol.

Default Values

By default, this is set to rstp.

Command Modes

(config)#

Global Configuration Mode required

Usage Examples

The following example sets the spanning-tree mode to rapid spanning-tree protocol:

(config)#spanning-tree mode rstp

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

351

Page 351
Image 351
HP 7000 dl Router manual Spanning-tree mode rstp stp, Rstp, Stp, Config#spanning-tree mode rstp