HP 7000 dl Router manual Show startup-config, #show startup-config

SROS Command Line Interface Reference Guide Enable Mode Command Set

show startup-config

Use the show startup-configcommand to display a text printout of the startup configuration file stored in

NVRAM.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output of the show startup-configcommand:

>enable

#show startup-config

!

!

no enable password

!

ip subnet-zero ip classless ip routing

!

event-history on

no logging forwarding

logging forwarding priority-level info no logging email

!

ip policy-timeout tcp all-ports 600 ip policy-timeout udp all-ports 60 ip policy-timeout icmp 60

!

!

!

interface eth 0/1 speed auto

no ip address

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 188