HP 7000 dl Router manual Serial-mode mode

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set

serial-mode <mode>

Use the serial-modecommand to specify the electrical mode for the interface. Use the no form of this command to return to the default value.

Syntax Description

<mode>	Specifies the electrical specifications for the interface
V35	Configures the interface for use with the V.35 adapter cable (P/N 1200873L1)
X21	Configures the interface for use with the X.21 adapter cable (P/N 1200874L1)

Default Values

<mode>V35

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode required

Functional Notes

The pinouts for each of the available interfaces may be found in the Hardware Configuration Guide located on the ProCurve SROS Documentation CD (provided in your shipment).

Usage Examples

The following example configures the serial interface to work with the X.21 adapter cable:

(config)#interface serial 1/1

(config-ser 1/1)#serial-mode X21

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 500