HP 7000 dl Router manual Debug ip tcp md5, #debug ip tcp md5

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip tcp md5

Use the debug ip tcp md5 command to activate debug messages that detail the results of each incoming TCP packet’s MD5 authentication with an internal route in the Secure Router OS. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

Debug messages will only be generated for TCP ports that have MD5 authentication enabled.

Usage Examples

The following example activates the display of these debug messages:

#debug ip tcp md5

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 86