Lldp receive

SROS Command Line Interface Reference Guide	HDLC Command Set

Use the lldp receive command to allow LLDP packets to be received on this interface.

Syntax Description

No subcommands.

Default Values

By default, all interfaces are configured to send and receive LLDP packets.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

The following example configures the HDLC interface to receive LLDP packets:

(config)#interface hdlc 1 (config-hdlc 1)#lldp receive

5991-2114

842