HP 7000 dl Router manual Show crypto ike, Client configuration, Pool, Policy

SROS Command Line Interface Reference Guide Enable Mode Command Set

show crypto ike

Use the show crypto ike command to display information regarding the IKE configuration.

Variations of this command include the following:

show crypto ike client configuration pool

show crypto ike client configuration pool <poolname> show crypto ike policy

show crypto ike policy <policy priority> show crypto ike remote-id <remote-id>show crypto ike sa

Syntax Description

client configuration	Displays the list of all configured IKE client configuration pools.
pool
<poolname>	Displays detailed information regarding the specified IKE client configuration pool.
policy	Displays information on all IKE policies. Indicates if client configuration is enabled
	for the IKE policies and displays the pool names.
< policy priority>	Displays detailed information on the specified IKE policy. This number is assigned
	using the crypto ike policy command. See crypto ike on page 223 for more
	information.
remote-id<remote-id>	Displays information on all IKE information regarding the remote-id. The remote-id
	value is specified using the crypto ike remote-idcommand (see crypto ike
	remote-idon page 227).
sa	Displays the configuration of active IKE security associations.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 116