HP 7000 dl Router CA Profile Configuration Command SET, CA Profile Configuration Command Set

SROS Command Line Interface Reference Guide CA Profile Configuration Command Set

CA PROFILE CONFIGURATION COMMAND SET

To activate the Certificate Authority (CA) Profile Configuration , enter the crypto ca profile command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#crypto ca profile MyProfile

Configuring New CA Profile MyProfile

Router(ca-profile)#

The following commands are common to multiple command sets and are covered in a centralized section of this guide. For more information, refer to the sections listed below:

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924 do on page 928

end on page 929 exit on page 930

ping <address> on page 931 show running-configon page 933

All other commands for this command set are described in this section in alphabetical order.

crl optional on page 419

email address <email address> on page 420 enrollment retry [count period] on page 421 enrollment terminal on page 422 enrollment url <url> on page 423

fqdn <fqdn> on page 424 ip-address <address> on page 425 password <password> on page 426 serial-numberon page 427 subject-name <name> on page 428

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 418