HP 7000 dl Router manual Atm routed-bridged ip, Use ip protocol to be route bridged

SROS Command Line Interface Reference Guide ATM Sub-Interface Config Command Set

atm routed-bridged [ip]

Use the atm routed-bridged ip command to enable routed bridge encapsulation (RBE) on an interface. Use the no form of this command to disable RBE operation.

Syntax Description>

ip Use ip protocol to be route bridged.

Default Values

By default, routed bridge encapsulation is disabled.

Command Modes

(config-atm 1.1)# ATM Sub-Interface Configuration Mode required

Usage Examples

The following example enables routed bridge encapsulation:

(config)#interface atm 1.1 (config-atm 1.1)#atm routed-bridged ip

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 649