HP 7000 dl Router manual Auto-summary, Config#router rip config-rip#no auto-summary

Router (RIP) Configuration Command Set

auto-summary

Use the auto-summarycommand to have RIP version 2 summarize subnets to the classful boundaries. Use the no form of this command to disable this summarization.

Syntax Description

No subcommands.

Default Values

By default, auto-summary is disabled.

Command Modes

(config-rip)# Router (RIP) Configuration Mode required

Functional Notes

Use this command if you are subdividing a classful network into many subnets and these subnets are to be advertised over a slow link (< 64K) to a router that can only reach the classful network via the router you are configuring.

Usage Examples

The following example configures the router to not automatically summarize network numbers:

(config)#router rip (config-rip)#no auto-summary

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 895