HP 7000 dl Router Test-pattern ones zeros, Config#interface t1 1/2 config-t11/2#test-pattern ones

SROS Command Line Interface Reference Guide DSX-1 Interface Configuration Command Set

test-pattern [ones zeros]

Use the test-patterncommand to activate the built-in pattern generator and begin sending the specified test pattern. This pattern generation can be used to verify a data path when used in conjunction with an active loopback. Use the no form of this command to cease pattern generation.

Syntax Description

ones	Generate continous ones
zeros	Generate continous zeros

Default Values

No defaults necessary for this command.

Command Modes

(config-t1 1/1)#	T1, DSX-1, E1, or G.703 Interface Configuration Mode required.
(config-t1 1/2)#

Usage Examples

The following example activates the pattern generator for a stream of continuous ones:

(config)#interface t1 1/2 (config-t11/2)#test-pattern ones

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 529