HP 7000 dl Router manual Optional. Selects message-digest authentication type

Command Reference Guide Tunnel Configuration Command Set

ip ospf authentication [message-digest null]

Use the ip ospf authentication command to authenticate an interface that is performing OSPF authentication.

Syntax Description

message-digest	Optional. Selects message-digest authentication type.
null	Optional. Specifies that no authentication is used.

Default Values

By default, this is set to null (meaning no authentication is used).

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), PPP virtual interfaces (ppp 1), HDLC
	virtual interfaces (hdlc 1), Frame Relay virtual sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

Usage Examples

The following example specifies that no authentication will be used on the tunnel interface:

(config)#interface tunnel 1 (config-tunnel 1)#ip ospf authentication null

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 797