HP 7000 dl Router manual Debug access-list listname, Enable #debug access-list MatchAll

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug access-list <listname>

Use the debug access-listcommand to activate debug messages (for a specified list) associated with access list operation. Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

<listname> Specifies a configured access list

Default Values

By default, all debug messages in the SROS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug access-listcommand provides debug messages to aid in troubleshooting access list issues.

Usage Examples

The following example activates debug messages for the access list labeled MatchAll:

>enable

#debug access-list MatchAll

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 61