HP 7000 dl Router manual Snmp-server enable traps trap type, Config#snmp-server enable traps snmp

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server enable traps <trap type>

Use the snmp-server enable traps command to enable all Simple Network Management Protocol (SNMP) traps available on your system or specified using the <trap type> option. Use multiple snmp-server enable traps to enable multiple trap types. Use the no form of this command to disable traps (or the specified traps).

Syntax Description

<trap type>	Optional. Specifies the type of notification trap to enable. Leaving this option blank
	enables ALL system traps.
snmp	Enables a subset of traps specified in RFC 1157
	The following traps are supported:
	coldStart
	warmStart
	linkUp
	linkDown
	authenticationFailure

Default Values

By default, there are no enabled traps.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example enables the SNMP traps:

(config)#snmp-server enable traps snmp

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 337