Installation and Operation Manual | Chapter 3 Operation |
|
|
Configuration
1.System
2.Physical layer
3.Connection
4.Bridge
Connection
1.Bundle ID
2.Connection Mode
3.PSN Type
2.DS0 bundle
3.Bundle connection
Bridge
1.Aging time
2.Erase MAC table
3.Bridge policy
4.VLAN table
VLAN Table
1.Channel
2.VLAN ID
3.Status
when Connection Mode=TDMoIP CE,
PSN Type=UDP/IP
Bundle Connection
1.Destination IP address
2.Next hop
3.IP TOS
4.Connection status
5.Destination bundle
6.TDM bytes in frame(x48 bytes)
7.Payload format
8.OAM connectivity
9.Jitter buffer [msec]
10.OOS mode
11.VLAN tagging
12.VLAN ID
13.VLAN priority
when Connection Mode=TDMoIP CE,
PSN Type=MPLS/ETH
Bundle Connection
1.Destination IP address
2.Outbound label tagging
3.Outbound tunnel label
4.Outbound EXP bits
5.Inbound label tagging
6.Inbound tunnel label
7.Connection status
8.Destination bundle
9.Next hop type
10.Next hop IP address
11.TDM bytes in frame(x48 bytes)
12.Far end type
13.OAM connectivity
14.Jitter buffer [msec]
15.Sensitive
16.OOS mode
17.VLAN tagging
18.VLAN ID
19.VLAN priority
Figure 3-4. Configuration > Connection and Bridge
Monitoring
1.Statistics
2.Status
3.Event log
Statistics
1.TDM physical layer
2.Connection
3.Bridge
Status
1.Diagnostics loopback
2.TDM Physical layer
3.ETH Physical layer
4.Connection
5.System Clock
Event Log
1.Read log file
2.Clear log file
Figure 3-5. Monitoring
Configuration Alternatives |
