RAD Data comm IPmux-11 Configuring Management Access Permissions and Methods, To add a new user

Chapter 4 Configuration Installation and Operation Manual

User Traffic	User 1
(VLAN 100)
User Equipment
	User 2

VLAN 1

Remote

IPmux-11

					User 1		User Traffic
VLAN 100			VLAN 100				(VLAN 100)
	Network	Network			User 2	Management Traffic
				VLAN 1				(VLAN 1)

Local

IPmux-11

Network

Management Station

Switch

User Equipment

Figure 4-7. Remote Management via User Ethernet Port

Configuring Management Access Permissions and Methods

The user access rights, as well as SNMP, Telnet and Web access authorization are configured via the Management Access menu.

To access The Management Access menu:

•From the Management menu, select Management access.

The Management Access menu is displayed (Figure 4-8).

Configuration>System>Management>Management access

1.	User access	>
2.	Telnet access	>	(Enable)
3.	Web access	>	(Enable)

>
Please select item <1 to 3>	1 Mngr/s
ESC-prev.menu; !-main menu; &-exit

Figure 4-8. Management Access Menu

Configuring User Access

IPmux-11 management software allows you to define new users, their management and access rights. Only superusers (su) can create new users, the regular users are limited to changing their current passwords, even if they were given full management and access rights.

To add a new user:

1.Make sure that you logged in as su.

2.From the Management Access menu, select User access. The User Access menu is displayed (see Figure 4-9).

3.From the User Access menu, do the following:

Select User name, and enter a name for a new user.

Select Permission, and specify the user’s access rights (full control or read-only).

4-8 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00