RAD Data comm operation manual Configuration, Configuring IPmux-11 for a Typical Application

Table of ContentsInstallation and Operation Manual

Chapter 4. Configuration
4.1	Configuration Sequence	4-1
4.2	Configuring IPmux-11 for Management	4-2
	Configuring IP Host Parameters	4-2
	Configuring Management Parameters	4-4
	Configuring Control Port Parameters	4-10
4.3	Configuring IPmux-11 for Operation	4-11
	Configuring the System Clock	4-11
	Configuring IPmux-11 at the Physical Level	4-13
	Configuring Bundle Connections	4-20
	Configuring the Ethernet Bridge	4-24
4.4	Additional Tasks	4-27
	Displaying the IPmux-11 Inventory	4-27
	Setting the Date and Time	4-27
	Displaying the IPmux-11 Status	4-28
	Transferring Software and Configuration Files	4-31
	Resetting IPmux-11	4-32
Chapter 5. Configuring IPmux-11 for a Typical Application
5.1	Overview	5-1
	Application	5-1
	Guidelines for Configuring IPmux-11 Units	5-1
5.2	Configuring IPmux-11 Units	5-2
	Configuring the IP Parameters	5-2
	Configuring E1 Parameters at the Physical Layer	5-3
	Configuring Bundles	5-4
Chapter 6. Troubleshooting and Diagnostics
6.1	Monitoring Performance	6-1
	Displaying E1/T1 Statistics	6-1
	Displaying LAN Statistics	6-5
	Displaying Bundle Connection Statistics	6-7
6.2	Detecting Errors	6-10
	Power-Up Self-Test	6-10
	Using Front Panel LEDs	6-11
	Working with the Event Log	6-11
6.3	Handling Alarms	6-15
	Masking Alarms	6-15
6.4	Troubleshooting	6-16
6.5	Testing IPmux-11	6-17
	Running Loopbacks	6-17
	Pinging IP Hosts	6-20
	Running a Trace Route	6-21
6.6	Frequently Asked Questions	6-22
6.7	Technical Support	6-25

Appendix A. Connector Wiring

Appendix B. Boot Sequence and Downloading Software

Appendix C. SNMP Management

ii IPmux-11 Ver. 2.00