RAD Data comm IPmux-11 Configuring Control Port Parameters, Management Access Implementation

Chapter 4 Configuration Installation and Operation Manual

Enable (Telnet, SNMP or Web access is enabled) Disable (Telnet, SNMP or Web access is disabled)

Manager Only (Access is allowed only for the stations appearing in the manager list).

Table 4-1. Management Access Implementation

Access Method	Mode	Who is Allowed to Access IPmux-11
		Network
			Network
		Manager(s)	Manager(s) not
		Defined	Defined
	Enable	Anybody	Anybody
SNMP Access	Disable	Nobody	Nobody
	Manager Only	Only defined	Nobody
		network managers
	Enable	Anybody	Anybody
Telnet Access	Disable	Nobody	Nobody
	Manager Only	Only defined	Anybody
		network managers
	Enable	Anybody	Anybody
Web Access	Disable	Nobody	Nobody
	Manager Only	Only defined	Anybody
		network managers

Configuration>System>Management>Management Access

1.	User Access	>
2.	TELNET access	>	(Enable)
3.	SNMP access	>	(Disable)
4.	WEB access	>	(Enable)
>
ESC-prev.menu; !-main menu; &-exit			1 Mngr/s

Figure 4-10. Management Access Menu

Configuring Control Port Parameters

Configuration parameters of the IPmux-11 control port, except for the baud rate are set at the factory and cannot be changed by the user (see Figure 4-11). These parameters have the following values:

•Data bits – 8

•Parity – None

•Stop bits – 1

•Flow control – None.

4-10 Configuring IPmux-11 for Management IPmux-11 Ver. 2.00