RAD Data comm IPmux-11 operation manual Package Contents, Connecting the Ethernet Equipment

Chapter 2 Installation and Setup Installation and Operation Manual

2.3 Package Contents

The IPmux-11 package includes the following items:

•One IPmux-11 unit

•Power cord

•IEC 60320 AC/DC adapter plug

•CBL-DB9F-DB9M-STR control port cable (if ordered)

•CBL-RJ45/2BNC/E1/X adapter cable for unbalanced E1 interface (if ordered)

•RM-33-2 rack mount kit (if ordered).

2.4 Connecting the Ethernet Equipment

IPmux-11 is connected to the Ethernet network equipment via the fiber optic LC or 8-pin RJ-45 electrical port designated ETH 1. Connection to the Ethernet user equipment is made via two 8-pin RJ-45 electrical ports designated ETH 2 and ETH 3. Refer to Appendix A for the RJ-45 connector pinout.

Connecting the Ethernet Network Equipment

Figure 2-1and Figure 2-2illustrate typical rear panels of the IPmux-11 unit with fiber optic LC and electrical RJ-45 network connectors, respectively.

To connect to the Ethernet network equipment with fiber optic interface:

•Connect IPmux-11 to the Ethernet network equipment using a standard fiber optic cable terminated with an LC connector.

CONTROL

EXT CLK	1	ETH	3	E1
		2

SET

DEF

Figure 2-1. ETH 1 Fiber Optic Connector

To connect to the Ethernet network equipment with a copper interface:

•Connect IPmux-11 to the Ethernet network equipment using a standard straight UTP cable terminated with an RJ-45 connector.

CONTROL

EXT CLK	1	ETH	3	E1
		2

SET

DEF

Figure 2-2. ETH 1 Electrical Connector

2-2 Connecting the Ethernet Equipment IPmux-11 Ver. 2.00