Listening to your system 06
37
En
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when
DIRECT
is
selected, the receiver automatically
switches to
STEREO
.

Choosing the input signal

• Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
• Press SIGNAL SELECT on the front
panel to select the input signal corre-
sponding to the source component.
Each press cycles through the options as
follows:
•
AUTO
– This automatically switches to
DIGITAL
if a digital source is detected,
otherwise it remains on
ANALOG
.
•
DVD 5.1ch
– Selects the multichannel
inputs (only appears when
DVD/LD
is
selected).
•
ANALOG
– Selects the analog inputs.
•
DIGITAL
– Selects the digital input.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input,
and
DTS
lights when a DTS signal is input.
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (including DTS
96kHz/24 bit). With other digital signal
formats, set to
ANALOG
.
•You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 17) and
set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
STATION STANDARD SPEAKERS
S-VIDEODIGITAL INSETUP MIC VIDEO LAUDIO R
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
TUNING
LISTENING MODE
TONE QUICK SETUP
TUNER EDIT CLASS BAND MPX
MULTI JOG
INPUT ATT FL DIMMER
MCACC VIDEO INPUT
MULTI JOG
VSX_D912.book.fm 37 ページ ２００３年１２月５日　金曜日　午前９時４３分