Setting up the receiver
07
42
En
Chapter 7:
Setting up the receiver
Choosing your receiver setup
To ensure the best possible surround sound,
be sure to complete the following set up
operations. This is particularly important
when using DTS and Dolby surround. You
only need to make these settings once (unless
you change the placement of your current
speaker system or add new speakers, etc.).
Refer to the following pages for details on
each of the settings.
• If you are using the Pioneer S-FCRW730
speaker system, make sure the
Subwoofer
setting
is set to
YES
and the
Speaker
setting
is set to
FS-CS-SS
. You’ll also have
to change the
Crossover frequency setting
to
200Hz
.
1Press RECEIVER.
2 Use
or
to choose the option you
want to adjust.
It will be easiest to adjust each of the settings
in turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
Speaker setting
(page 43)
Specify the number and type of speakers
you have connected.
Surround back speaker setting
(page 44)
Specify your surround back speaker/
surround back subwoofer setup.
Subwoofer setting
(page 44)
Specify how the subwoofer is used.
Crossover frequency setting
(page 44)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
LFE attenuator setting
(page 45)
Choose the attenuator level for the LFE
channel.
Front left speaker distance setting
(page 45)
Specify the distance from your listening
position to your front left speaker.
Center speaker distance setting
(page 45)
Specify the distance from your listening
position to your center speaker.
Front right speaker distance setting
(page 46)
Specify the distance from your listening
position to your front right speaker.
+
10
INPUT ATT FL DIMMER SR DISC
MULTI CONTROL
SETUP
ENTER
TV CONTROL
VOL
DVD/LD TV/SAT DVR/VCR TV CONT
CD
INPUT
SELECT TV CH
TV VOL
CD-R/TAPE
TUNER RECEIVER
ENTER
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN
GUIDE
T.EDIT
MCACC
SETUP
VSX_D912.book.fm 42 ページ ２００３年１２月５日 金曜日 午前９時４３分