Manuals / Eizo / Computer Equipment / Computer Monitor

Eizo FlexScan L675 manual Attaching An Arm Stand, Setup Procedure, English

Models: FlexScan L675

1 57

Page 37

7. ATTACHING AN ARM STAND

The LCD monitor can be used with an arm stand by removing the tilt stand and attaching the arm stand to the LCD monitor.

NOTE
´	Use an arm stand that satisfies the followings.
	•	When using the LCD monitor with an arm stand, the
		arm stand must be VESA approved :	M4 x 16 mm x 4
		* Use an arm stand with a 100 mm x 100 mm hole	100 mm
		spacing on the arm mounting pad.	100 mm
		spacing on the arm mounting pad.
		* Use an arm stand that is able to support an	100 mm
		object weighing 13.5 kg.	100 mm
		object weighing 13.5 kg.
	´	TÜ V/GS approved arm stand.

´Use an arm stand with sufficient stability (mechanical firmness) to support the weight of the monitor.

´Use an arm stand remaining that position where it is manually moved.

´Use an arm stand with the ability to tilt the monitor forward and backward.

´Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the LCD monitor down. Do not scratch the panel.

2. Remove the stand by loosening the screws. (4 pcs of M4 x 16 Ni/Fe)

ENGLISH

7. ATTACHING AN ARN STAND 37

Page 37

Image 37

Eizo FlexScan L675 manual Attaching An Arm Stand, Setup Procedure, English

Contents

ENGLISH SAFETY SYMBOLS ENGLISH TABLE OF CONTENTS´ Refer all servicing to qualified service personnel PRECAUTIONS´ Do not dismantle the cabinet or modify the unit Keep small objects or liquids away from the unit ENGLISH´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Handle the power cord with care ´ To disconnect the power cord, grasp the plug firmly and pull´ The equipment must be connected to a grounded main outlet ´ Use the correct voltageENGLISH ´ Handle with care when carrying the unit´ Do not touch a damaged LCD panel directly with bare hands LCD panel´ Periodically clean the area around the plug ´ Use an easily accessible power outlet´ Unplug the unit before cleaning it ´ Do not touch the plug with wet handsLCD Panel Suggestions for Maximizing ComfortENGLISH 1. INTRODUCTION 1-1. FeaturesWarranty Registration Card 1-2. Package ContentsENGLISH Front 1-3. Controls & ConnectorsENGLISH Rear2. CABLE CONNECTION 2-1. Before connectingENGLISH 2-2. Connecting the signal cableAnalog Input Digital Input2. Plug the power cord into the power connector on the rear of the monitor 5. Turn on the monitor’s power and then switch on the PC’s power 4. Plug the other end of the power cord into a power outletENGLISH ´ The equipment must be connected to a grounded main outlet2. Making Adjustments and Settings 3-1. How to use the ScreenManager3. ScreenManager 1. Entering the ScreenManagerENGLISH 3-2. ScreenManager Adjustments and SettingsMain menu Sub menuAdjustment Lock 3-3. Useful FunctionsEIZO Logo Disappearing function Procedure Off TimerOff timer system ENGLISH4-1. Screen Adjustment 4. ADJUSTMENT1. Push the Auto adjustment button on the front panel 2. Install the “Screen adjustment program”Æ Use the “Clock” p.46 adjustment 3. Adjust by using “Screen” menu in the ScreenManager1 Vertical bars appear on the screen 2 Horizontal flickering, blurring or bars appear on the screen24 4. ADJUSTMENT 3 The screen position is incorrect Æ Use the “Position” adjustmentÆ Use the “Brightness” adjustment 5. Set the Contrast of the screen Æ Use the “Contrast” adjustment6. Set the Brightness of the screen ENGLISHUse the “Resolution” adjustment Use the “Position” adjustmentUse the “Contrast” adjustment Use the “Brightness” adjustment1. Enlarge the screen size when displaying a low resolution 4-2. Displaying a low resolutionsÆ Select “Screen Size” ENGLISH2. Smooth the blurred texts of the enlarged screen Æ Use the “Smoothing” adjustmentÆ Set the “Border Intensity” 1. To change the color tone of the white Æ Set the “Temperature”.p.46 4-3. Color AdjustmentBefore the Color adjustment ENGLISH3. To change the flesh color, etc Æ Use the “Hue” adjustment 2. To change the saturation Æ Use the “Saturation” adjustment4. To adjust each color red, green and blue Æ Use the “Gain”p.47 adjustment1. To use the PC’s power saving system VESA DPMS 4-4. Power-save Setup2. To set the power save with ScreenSaver software EIZO MPMS ENGLISHPower saving system ProcedureDigital Input Connecting to the USB HUB 5. MAKING USE OF USB Universal Serial BusRequired system environment ENGLISHScanner Example of connectionPrinter Digital Camera Keyboard Connecting Examples Analog x Digital 6. CONNECTING TWO PCs to THE MONITORENGLISH Analog x AnalogInput Signal Selection Button The priority input signalSelecting the active input Setup Procedure 7. ATTACHING AN ARM STANDENGLISH M4 Mounting Screws M4 x 16 mm Arm-stand 3. Attach an arm stand to the LCD monitor securelyProblems 8. TROUBLESHOOTINGPoints to check with possible solutions ENGLISHWhen the screen becomes dark or begins to flicker Adjust the “contrast and brightness”When the screen image is changed after displaying the Use the “Off Timer” function and avoid keeping the screen11. The screen has defective Points to check with possible solutions Problems42 8.TROUBLESHOOTING Cabinet 9. CLEANINGLCD Panel ENGLISH10.SPECIFICATIONS Beeper settings Default setting10. SPECIFICATIONS ENGLISHColor Temperature Temperature 11.GLOSSARYAfterimage ClockPhase Gain AdjustmentRange Adjustment Resolution12.INDEX ENGLISH 50 12. INDEX MEMOAPPENDIX APPENDIX / ANHANG / ANNEXEii APPENDIX APPENDIX APPENDIXPin Assignment Pin-Belegung Affectation des Broches Dimensions Abmessungen Dimensionsiv APPENDIX mm inchesCongratulations Why do we have environmentally labelled computers?What does labelling involve? Cadmium Environmental requirements Flame retardantsMercury CFCs freonsFCC Declaration of Conformity For U.S.A, Canada, etc. rated 100-120 Vac OnlyCanadian Notice