Eizo FlexScan L675 manual The screen has defective

Problems	Points to check with possible solutions
11. The screen has defective	This is due to the characteristics of the panel itself, and not
pixels (e.g. slightly light	the LCD product.
or dark).		ENGLISH
12. Fingerprints remain on	Leaving the screen black may solve the problem.
the screen.
13. The “Smoothing” can not	“Smoothing” is disabled when the screen is displayed in the
be selected.	following resolution.
	• 1280 x 1024
	The image size is doubled both in horizontally and
	vertically (i.e. 1280 x 960 enlarged from 640 x 480) to
	provide clear focus which does not require this function.
14. The noise appears on the	Change the mode in “Signal Filter” in the “Screen”
screen.	Adjustment”.
15. The utility disk is unable	Some Macintosh without PC-Exchange do not allow the
to be opened (for	utility disk to be opened. Please set the desktop pattern to
Macintosh only).	every-other-dot before adjustment. (p.22)
16. • The Enter button does	The adjustment lock is probably on. To unlock: switch the
	LCD monitor off. Then, while pressing the Auto
not operate.
	adjustment button switch, the power on. (p.20)
• The Auto adjustment
button does not operate.
17. The Auto adjustment	The Auto sizing function is intended for use on the
button does not work
	Macintosh and on AT-compatible PC running Windows.
properly.
	It may not work properly in either of the following cases.
	When running an AT-compatible PC on MS-DOS (Not
	windows).
	The background color for the “wall paper” or “desktop”
	pattern is set to black.
	Some signals from a graphics board may not function
	properly.

8.TROUBLESHOOTING 41