Manuals / Eizo / Computer Equipment / Computer Monitor

Eizo FlexScan L675 For U.S.A, Canada, etc. rated 100-120 Vac Only, FCC Declaration of Conformity

Models: FlexScan L675

1 57

Download 57 pages 24.94 Kb

Page 57

For U.S.A, Canada, etc. (rated 100-120 Vac) Only

For U.S.A, Canada, etc. (rated 100-120 Vac) Only

FCC Declaration of Conformity

We, the Responsible Party	EIZO NANAO TECHNOLOGIES INC.
	5710 Warland Drive, Cypress, CA 90630
	Phone: 562 431 5011
declare that the product	Trade name: EIZO
	Model: FlexScan L675

is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

*Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device.

-AC Cord

-Shielded Signal Cable (enclosed)

Canadian Notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.

Image 57

Eizo FlexScan L675 manual For U.S.A, Canada, etc. rated 100-120 Vac Only, FCC Declaration of Conformity, Canadian Notice

Contents

ENGLISH SAFETY SYMBOLS ENGLISH TABLE OF CONTENTSPRECAUTIONS ´ Refer all servicing to qualified service personnel´ Do not dismantle the cabinet or modify the unit Keep small objects or liquids away from the unit ENGLISH´ Place the unit on a strong, stable surface ´ Set the unit in an appropriate location´ Handle the power cord with care ´ To disconnect the power cord, grasp the plug firmly and pull´ The equipment must be connected to a grounded main outlet ´ Use the correct voltageENGLISH ´ Handle with care when carrying the unit´ Do not touch a damaged LCD panel directly with bare hands LCD panel´ Periodically clean the area around the plug ´ Use an easily accessible power outlet´ Unplug the unit before cleaning it ´ Do not touch the plug with wet handsSuggestions for Maximizing Comfort LCD PanelENGLISH 1. INTRODUCTION 1-1. Features1-2. Package Contents Warranty Registration CardENGLISH Front 1-3. Controls & ConnectorsENGLISH Rear2. CABLE CONNECTION 2-1. Before connectingENGLISH 2-2. Connecting the signal cableAnalog Input Digital Input2. Plug the power cord into the power connector on the rear of the monitor 5. Turn on the monitor’s power and then switch on the PC’s power 4. Plug the other end of the power cord into a power outletENGLISH ´ The equipment must be connected to a grounded main outlet2. Making Adjustments and Settings 3-1. How to use the ScreenManager3. ScreenManager 1. Entering the ScreenManagerENGLISH 3-2. ScreenManager Adjustments and SettingsMain menu Sub menu3-3. Useful Functions Adjustment LockEIZO Logo Disappearing function Procedure Off TimerOff timer system ENGLISH4-1. Screen Adjustment 4. ADJUSTMENT1. Push the Auto adjustment button on the front panel 2. Install the “Screen adjustment program”Æ Use the “Clock” p.46 adjustment 3. Adjust by using “Screen” menu in the ScreenManager1 Vertical bars appear on the screen 2 Horizontal flickering, blurring or bars appear on the screen24 4. ADJUSTMENT 3 The screen position is incorrect Æ Use the “Position” adjustmentÆ Use the “Brightness” adjustment 5. Set the Contrast of the screen Æ Use the “Contrast” adjustment6. Set the Brightness of the screen ENGLISHUse the “Resolution” adjustment Use the “Position” adjustmentUse the “Contrast” adjustment Use the “Brightness” adjustment1. Enlarge the screen size when displaying a low resolution 4-2. Displaying a low resolutionsÆ Select “Screen Size” ENGLISHÆ Use the “Smoothing” adjustment 2. Smooth the blurred texts of the enlarged screenÆ Set the “Border Intensity” 1. To change the color tone of the white Æ Set the “Temperature”.p.46 4-3. Color AdjustmentBefore the Color adjustment ENGLISH3. To change the flesh color, etc Æ Use the “Hue” adjustment 2. To change the saturation Æ Use the “Saturation” adjustment4. To adjust each color red, green and blue Æ Use the “Gain”p.47 adjustment1. To use the PC’s power saving system VESA DPMS 4-4. Power-save Setup2. To set the power save with ScreenSaver software EIZO MPMS ENGLISHProcedure Power saving systemDigital Input Connecting to the USB HUB 5. MAKING USE OF USB Universal Serial BusRequired system environment ENGLISHExample of connection ScannerPrinter Digital Camera Keyboard Connecting Examples Analog x Digital 6. CONNECTING TWO PCs to THE MONITORENGLISH Analog x AnalogThe priority input signal Input Signal Selection ButtonSelecting the active input 7. ATTACHING AN ARM STAND Setup ProcedureENGLISH M4 Mounting Screws M4 x 16 mm Arm-stand 3. Attach an arm stand to the LCD monitor securelyProblems 8. TROUBLESHOOTINGPoints to check with possible solutions ENGLISHWhen the screen becomes dark or begins to flicker Adjust the “contrast and brightness”When the screen image is changed after displaying the Use the “Off Timer” function and avoid keeping the screen11. The screen has defective Problems Points to check with possible solutions42 8.TROUBLESHOOTING Cabinet 9. CLEANINGLCD Panel ENGLISH10.SPECIFICATIONS Beeper settings Default setting10. SPECIFICATIONS ENGLISHColor Temperature Temperature 11.GLOSSARYAfterimage ClockPhase Gain AdjustmentRange Adjustment Resolution12.INDEX ENGLISH 50 12. INDEX MEMOAPPENDIX APPENDIX / ANHANG / ANNEXEii APPENDIX APPENDIX APPENDIXPin Assignment Pin-Belegung Affectation des Broches Dimensions Abmessungen Dimensionsiv APPENDIX mm inchesWhy do we have environmentally labelled computers? CongratulationsWhat does labelling involve? Cadmium Environmental requirements Flame retardantsMercury CFCs freonsFor U.S.A, Canada, etc. rated 100-120 Vac Only FCC Declaration of ConformityCanadian Notice