4-3. Color Adjustment
The “ColorManagement”menu in the ScreenManager enables to change the color of the screen.
Before the Color adjustment
•Allow the LCD monitor to stabilize for at least 20 minutes before making color adjustments.
•After finishing each adjustment in the custom mode, select “Save” icon to resister the adjustment. Otherwise, the adjustment will be lost.
•The adjustment values represent the current level within the specific adjustment only. They are available only as a reference tool. (To create a uniform white or black screen, the percentages for each will probably not be the same.)
•In the analog input, perform the “Range Adjustment” (p.25) before making the color adjustments . The gradation pattern like below is recommended for the “Range Adjustment”.
ENGLISH
1. To change the color tone of the white.
Æ
Set the “Temperature”.p.46)
The “Temperature” can be set from 4,000 K to 10,000 K , in 500 K increments (including 9,300 K). The default setting is “OFF”.
To resister the adjustment in the custom mode, select the “Save” icon and then push the enter button.
•Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature’s setting turns “OFF”.)
•Adjusting the “Gain” (p. 30) invalidates the color temperature setting. (The color temperature’s setting turns “OFF”.)
4. ADJUSTMENT 29
