´ Handle with care when carrying the unit | Eizo FlexScan L675

WARNING

´ Do not touch a damaged LCD panel directly with bare hands.

The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor.

´Follow local regulation or laws for safe disposal. The backlight of the LCD panel contains mercury.

CAUTION

´Handle with care when carrying the unit.

Disconnect the power cord, cables and remove the optional i·Sound sound unit (if applicable) when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury or equipment damage.

* When handling the unit, grip the bottom of the unit firmly with both hands

ensuring the panel faces outward before lifting. Then, do not grasp the
LCD panel.	OK

Dropping the unit may result in injury or equipment damage.

´ Do not block the ventilation slots on the cabinet.

* Do not place books or any other papers on the ventilation slots. * Do not install the unit in a closed space.

* Do not use the unit laying down or upside down.

Using the unit in these ways blocks the ventilation slots and prevents proper airflow, leading to fire or other damage.

ENGLISH

PRECAUTIONS 7

Image 7

Eizo FlexScan L675 ´ Do not touch a damaged LCD panel directly with bare hands, ´ Handle with care when carrying the unit

Contents

English Safety Symbols Table of Contents ´ Refer all servicing to qualified service personnel Precautions´ Do not dismantle the cabinet or modify the unit ´ Place the unit on a strong, stable surface Keep small objects or liquids away from the unit´ Set the unit in an appropriate location ´ The equipment must be connected to a grounded main outlet ´ Handle the power cord with care´ Use the correct voltage ´ Do not touch a damaged LCD panel directly with bare hands ´ Handle with care when carrying the unit´ Do not block the ventilation slots on the cabinet ´ Do not touch the plug with wet hands ´ Use an easily accessible power outlet´ Periodically clean the area around the plug ´ Unplug the unit before cleaning it Suggestions for Maximizing Comfort Introduction Features Package Contents Front Controls & Connectors Rear Digital Input Before connectingCable Connection Analog Input Analog Input Connecting the signal cableDigital Input 16 2. Connecting UP Plug the other end of the power cord into a power outlet Exiting the ScreenManager How to use the ScreenManagerMaking Adjustments and Settings Entering the ScreenManager Main menu Sub menu Reference ScreenManager Adjustments and Settings Useful Functions Adjustment LockEizo Logo Disappearing function Procedure Off TimerOff timer system Push the Auto adjustment button on the front panel AdjustmentScreen Adjustment Adjustment Procedure for Analog Input Horizontal flickering, blurring or bars appear on the screen Screen position is incorrect Use the Position adjustment Auto Set the Contrast of the screen Use the Contrast adjustment Set the Brightness of the screen Use the Resolution adjustmentScreen position is incorrect Set the Contrast of the screen Displaying a low resolutions 28 4. Adjustment Before the Color adjustment Color Adjustment To change the flesh color, etc Use the Hue adjustment To change the saturation Use the Saturation adjustment Power saving system Power-save SetupTo use the PC’s power saving system Vesa Dpms To set the power save with ScreenSaver software Eizo Mpms 32 4. Adjustment Required system environment Connecting to the USB HUB USB Example of connection Digital x digital Connecting Examples Analog x DigitalMonitor Analog x Analog Selecting the active input Priority input signal Attaching AN ARM Stand Setup Procedure 38 7. Attaching AN ARN Stand Following messages TroubleshootingProblems Points to check with possible solutions No picture Afterimages appear Too dark Or dark Auto adjustment Button does not operateScreen has defective Pixels e.g. slightly light PC is hung up. / Change after installingSetup Frequency does not Cabinet CleaningLCD Panel Vesa DDC 2B Specifications Beeper settings Default setting Clock Color Temperature TemperatureGlossary Afterimage Resolution Gain AdjustmentPhase Range Adjustment Attaching AN ARM Stand Index USB 10,31,33,44 Vesa Dpms 19,31,47 Memo Appendix Appendix / Anhang / Annexe Ii Appendix 480 800 525 907 111 356 556 25.422 12.712 31.778 14.267 180 Pin Assignment Pin-Belegung Affectation des Broches Dimensions Abmessungen Congratulations Why do we have environmentally labelled computers?What does labelling involve? CFCs freons Environmental requirements Flame retardantsCadmium Mercury Warland Drive, Cypress, CA We, the Responsible PartyPhone 562 431