Eizo FlexScan L675 Set the Contrast of the screen Æ Use the “Contrast” adjustment, English, Auto

4. Set the Output signal range (Dynamic Range) of the signal. Æ Use the “Range Adjustment”.p.47)

This controls the level of output signal range to display the whole color gradation (256 colors). Select the “Range Adjustment”in the color menu.

[Auto]

Push the Auto adjustment button on the front panel while displaying the “Range adjustment” menu to automatically adjust the range. The screen blanks for a moment, and adjusts the color range to display the whole color gradation of the current output signal.

•Pressing Auto adjustment button while displaying the contrast/brightness adjustment screen (appeared by pressing the control buttons directly) adjusts the range automatically.

5.Set the Contrast of the screen.

Æ Use the “Contrast” adjustment.

This controls the brightness for the each color (red, blue and green) at a same time.

Select “Contrast/Brightness” in the screen menu and adjust by using the right and left buttons.

• Percentage over the 100 % may cause undisplayable color tone.

6.Set the Brightness of the screen.

Æ Use the “Brightness” adjustment.

This controls the brightness for the entire screen. The brightness of the entire screen is controlled by changing the brightness if the backlight.

Select “Contrast/Brightness” in the screen menu and adjust by using the up and down buttons.

•Directly pressing the control buttons also adjusts the contrast and brightness. Press the “Enter” button to save and exit the settings after the adjustment.

ENGLISH

4. ADJUSTMENT 25