HP 7000 dl Router manual Show hosts, #show hosts

SROS Command Line Interface Reference Guide Enable Mode Command Set

show hosts

Use the show hosts command to display information such as the domain name, name lookup service, a list of name server hosts, and the cached list of host names and addresses on the network to which you can connect.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Mode

Functional Notes

The list below describes the fields contained in the host table:

•Flags: Indicate whether the entry is permanent (P) or temporary (T) and if the entry is OK or expired (EXP).

•Age: Indicates how old the entry is.

•Type: Shows the protocol type.

•Address: Displays the IP address for the entry.

Usage Examples

The following is sample output from the show hosts command: >enable

#show hosts

Name/address lookup uses domain name service

DNS Proxy is disabled

Default domain is not set

Name servers are 1.1.1.1 2.2.2.2

	Flags	Age	Type	Address
Example1	(P OK)	- -	IP	1.1.1.1
Example2	(P OK)	- -	IP	2.2.2.2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 131