SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

Default Values

(Continued)

 

hostname

Optional. By default, the hostname is the name configured using the Global

 

 

Configuration

 

 

hostname command.

 

“<string>”

By default, the hostname is the name configured using the Global Configuration

 

 

hostname command.

 

Command Modes

 

 

 

 

(config-interface)#

Interface Configuration Mode required.

 

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual Frame Relay sub-interfaces (fr 1.20), and VLAN interfaces.

Functional Notes

DHCP allows interfaces to acquire a dynamically assigned IP address from a configured DHCP server on the network. Many Internet Service Providers (ISPs) require the use of DHCP when connecting to their services. Using DHCP reduces the number of dedicated IP addresses the ISP must obtain. Consult your ISP to determine the proper values for the client-idand hostname fields.

Usage Examples

The following example enables DHCP operation on the virtual frame-relay interface (labeled 1.16):

(config)#interface frame-relay 1.16 (config-fr 1.16)#ip address dhcp

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

620

Page 620
Image 620
HP 7000 dl Router manual Hostname command