HP 7000 dl Router manual Show tcp info control block, Enable #show tcp info

SROS Command Line Interface Reference Guide Enable Mode Command Set

show tcp info <control block>

Use the show tcp info command to display TCP control block information in the Secure Router OS. This information is for troubleshooting and debug purposes only. For more detailed information, you can optionally specify a particular TCP control block. When a particular TCP control block is specified, the system provides additional information regarding crypto map settings that the show tcp info command does not display.

Syntax Description

<control block>	Optional. Specify a particular TCP control block for more detailed information. The
	valid range is from 0 to 31.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample from the show tcp info command:

>enable

#show tcp info

TCP TCB Entries
ID	STATE	LSTAT	OSTAT	TYPE	FLAGS	RPORT	LPORT	SWIN	SRT	INTERFAC
0	FREE	E	E	SRVR	0	0	0	0	0	E
1	LISTEN	FREE	FREE	CONN	0	0	21	0	0	NONE
2	LISTEN	FREE	FREE	CONN	0	0	80	0	0	NONE
3	LISTEN	FREE	FREE	CONN	0	0	23	0	0	NONE
4	LISTEN	FREE	FREE	CONN	0	0	5761	0	0	NONE
5	FREE	FREE	FREE	SRVR	0	0	0	0	0	NONE
		FREE	FREE							NONE
.
.
31	FREE	FREE	FREE	SRVR	0	0	0	0	0	NONE

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 191