HP 7000 dl Router manual DDS Interface Configuration Command SET

SROS Command Line Interface Reference Guide DDS Interface Configuration Command Set

DDS INTERFACE CONFIGURATION COMMAND SET

To activate the DDS Interface Configuration , enter the interface dds command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#interface dds 1/1

Router(config-dds 1/1)#

The following commands are common to multiple command sets and are covered in a centralized section of this guide. For more information, refer to the sections listed below:

alias <“text”> on page 923

bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on page 924 description on page 927

do on page 928 end on page 929 exit on page 930

ping <address> on page 931 show running-configon page 933 shutdown on page 935

All other commands for this command set are described in this section in alphabetical order.

clock rate <rate> on page 487 clock source <option> on page 488 data-coding scrambled on page 489 loopback [dte line remote] on page 490 remote-loopbackon page 491

snmp trap on page 492

snmp trap link-statuson page 493

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 486