HP 7000 dl Router manual Spanning-tree edgeport bpdufilter default

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree edgeport bpdufilter default

Use the spanning-tree edgeport bpdufilter default command to enable the bpdufilter on all ports by default. Use the no form of this command to disable the setting.

Syntax Description

No subcommands.

Default Values

Disabled by default.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

The bpdufilter blocks any BPDUs from being transmitted and received on an interface. This can be overridden on an individual port.

Usage Examples

The following example enables the bpdufilter on all ports by default:

(config)#spanning-tree edgeport bpdufilter default

To disable the bpdufilter on a specific interface, issue the appropriate commands for the given interface (using the following commands as an example):

(config)#interface ethernet 0/1

(config-eth0/1)#spanning-tree bpdufilter disable

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 347