Concord Camera JD C3.1z3 manual Restoring Factory Default Settings, Option Default Status

RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS

RESTORING FACTORY DEFAULT SETTINGS

To restore the default settings in your camera:

1.In the Setup Menu, press or until Restore Default is highlighted.

2.Press or to highlight No or Yes, and then press OK to confirm.

•If No is selected, no change is made. The LCD returns to the previous screen.

•If Yes is selected, the LCD shows “Are you sure?”

3.Press or to highlight Yes or No, then press OK.

•If No is selected, no change will be made. The LCD returns Setup page.

•If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring....” and then return to setup page. The Default settings will be restored.

The table below lists the default settings:

OPTION	DEFAULT STATUS
Camera Mode	Single Shot
Image Size	2048 x 1536
Quality	Normal
Flash	Auto Flash
White Balance	AWB
LCD Brightness	Center (0)
Scene Selection	OFF
Digital Zoom	Yes
Exposure Compensation	0
ISO	Auto
Metering	Matrix
Photo Effect	None
Time Out	2 Min
Slide show interval	2 Seconds
Beep	On
Quick View	1 Sec
AF Mode	Multi-Area
Continuous Repeat	Off
AF Assist Light	Auto
TV Mode	NTSC for USA/Japan, PAL for Europe/Asia
Date/Time Format	USA/Japan: MM/DD/YYYY, 12-hour
	Europe/Asia: DD/MM/YYYY, 24-hour

ENU

44