AMX NXA-ENET24 manual Radius-server timeout Syntax, Show radius-server Default Setting None

CLI (Command Line Interface)

RADIUS Client Commands (Cont.)

Command	Function
radius-server retransmit	Syntax:
This command sets the	radius-server retransmit number_of_retries
number of retries.	no radius-server retransmit
	• number_of_retries - Number of times the switch will try to authenticate logon
Use the no form to restore
	access via the RADIUS server. (Range: 1-30)
the default.
	Default Setting: 2
	Command Mode: Global Configuration
	Example:
	Console(config)#radius-server retransmit 5
	Console(config)#
radius-server timeout	Syntax:
This command sets the	radius-server timeout number_of_seconds
interval between	no radius-server timeout
	• number_of_seconds - Number of seconds the switch waits for a reply before
transmitting authentication
	resending a request. (Range: 1-65535)
requests to the RADIUS
	Default Setting: 5
server.
Use the no form to restore	Command Mode: Global Configuration
the default.	Example:
	Console(config)#radius-server timeout 10
	Console(config)#
show radius-server	Default Setting: None
This command displays the	Command Mode: Privileged Exec
current settings for the	Example:
RADIUS server.	Console#show radius-server
	Remote RADIUS server configuration:
	Global settings
	Communication key with RADIUS server:
	Server port number:	1812
	Retransmit times:	2
	Request timeout:	5
	Sever 1:
	Server IP address: 192.168.1.1
	Communication key with RADIUS server:
	Server port number:	1812
	Retransmit times:	2
	Request timeout:	5
	Console#

NXA-ENET24 - Software Management Guide 201