Port Configuration
98 NXA-ENET24 - Software Management Guide

Setting Broadcast Storm Thresholds - Web

Click Port, Broadcast Control. Set the threshold any port, click Apply.

Setting Broadcast Storm Thresholds - CLI

Specify any interface, and then enter the threshold. The following disables broadcast storm control for port 1,
and then sets broadcast suppression at 600 packets per second for port 2.
Configuring Port Mirroring
You can mirror traffic from any source port to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing the source port in a completely
unobtrusive manner.
Command Usage
Monitor port speed should match or exceed source port speed, otherwise traffic may be dropped
from the monitor port.
All mirror sessions have to share the same destination port.
When mirroring port traffic, the target port must be included in the same VLAN as the source port.
FIG. 100 Web - Enabling Port Broadcast Control
FIG. 101 CLI - Enabling Port Broadcast Control